Need help?Do you have a question about the GE ERESCO MF4 Series and is the answer not in the manual?
Explanation of safety symbols used in the manual and on the system for warnings and information.
Guidelines and recommendations for safe operation to minimize radiation exposure.
Information on potential hazards associated with high voltage and X-ray radiation.
Defines who is permitted to operate the unit and their responsibilities.
Measures to enhance safety at the installation site and handling of increased earth leakage current.
Specifies the designated purpose of the unit for material testing and prohibits other uses.
Detailed steps and connection diagrams for installing the X-ray unit.
Procedure for connecting the unit to mains and bringing it to stand-by or operating mode.
How to adjust key operating parameters like exposure time, kV, and mA settings.
Using the integrated calculator to determine appropriate mA x min product and exposure time.
Procedure for initiating an X-ray exposure, including prewarning and safety checks.
How to safely stop an X-ray exposure at any time.
Steps for saving and naming custom exposure programs.
Shows technical specifications of the connected X-ray tube and radiating unit.
Configuration settings for communication interfaces like Baud rate and protocol.
Setting the duration of the prewarning time before radiation is emitted.
Tool for calculating exposure factors and correction factors for different materials.
Defining where system data like history and programs are stored.
Recommendations for handling and operating X-ray tubes to ensure longevity and performance.
Maintenance tasks and guidelines for the optional water cooling pump.
Procedure to test the functionality of the flow rate monitor's automatic shut-off.
Testing the fail-safe mechanism of the optional warning flash light.
Detailed technical specifications for the ERESCO MF4 control unit.
Technical specifications for the ERESCO 32 MF4-C model.
Technical specifications for ERESCO 42 MF4 and 42 MF4-W models.
Technical specifications for the ERESCO 52 MF4-CL model.
Technical specifications for ERESCO 65 MF4 and 65 MF4-W models.
Technical specifications for ERESCO 160 MF4-R and 160 MF4-RW models.
Technical specifications for ERESCO 280 MF4-R and 280 MF4-RW models.
Technical specifications for the ERESCO 300 MF4-R model.
Explanation of safety symbols used in the manual and on the system for warnings and information.
Guidelines and recommendations for safe operation to minimize radiation exposure.
Information on potential hazards associated with high voltage and X-ray radiation.
Defines who is permitted to operate the unit and their responsibilities.
Measures to enhance safety at the installation site and handling of increased earth leakage current.
Specifies the designated purpose of the unit for material testing and prohibits other uses.
Detailed steps and connection diagrams for installing the X-ray unit.
Procedure for connecting the unit to mains and bringing it to stand-by or operating mode.
How to adjust key operating parameters like exposure time, kV, and mA settings.
Using the integrated calculator to determine appropriate mA x min product and exposure time.
Procedure for initiating an X-ray exposure, including prewarning and safety checks.
How to safely stop an X-ray exposure at any time.
Steps for saving and naming custom exposure programs.
Shows technical specifications of the connected X-ray tube and radiating unit.
Configuration settings for communication interfaces like Baud rate and protocol.
Setting the duration of the prewarning time before radiation is emitted.
Tool for calculating exposure factors and correction factors for different materials.
Defining where system data like history and programs are stored.
Recommendations for handling and operating X-ray tubes to ensure longevity and performance.
Maintenance tasks and guidelines for the optional water cooling pump.
Procedure to test the functionality of the flow rate monitor's automatic shut-off.
Testing the fail-safe mechanism of the optional warning flash light.
Detailed technical specifications for the ERESCO MF4 control unit.
Technical specifications for the ERESCO 32 MF4-C model.
Technical specifications for ERESCO 42 MF4 and 42 MF4-W models.
Technical specifications for the ERESCO 52 MF4-CL model.
Technical specifications for ERESCO 65 MF4 and 65 MF4-W models.
Technical specifications for ERESCO 160 MF4-R and 160 MF4-RW models.
Technical specifications for ERESCO 280 MF4-R and 280 MF4-RW models.
Technical specifications for the ERESCO 300 MF4-R model.
General| Brand | GE |
|---|---|
| Model | ERESCO MF4 Series |
| Category | Industrial Equipment |
| Language | English |
To Next Page
