GE Free-Standing Electric Range User Manual

m
lectric Ran
I[_ Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: www.GEAppliances.com I
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
- iMPORTANT - Savethese
instructions for local inspector's use.
- iMPORTANT - Observea,
governing codes and ordinances.
e Nots to mnstaiier - Be sure to leave these
instructions with the Consumer.
• Nots to Consumer - Keep these
instructions for future reference.
• Skill level - installation of this appliance
requires basic mechanical skills.
• Completion time - 1 to 3 hours
• Proper installation is the responsibility of
the installer.
• Product faihre due to improper installation
is not covered under the Warranty.
-&WARNING - This appliance must
be properly grounded.
ANTI-TIP DEVICE
-&WARNING - Toreducetherisk
of tipping, the appliance must be secured by
properly installed Anti-Tip bracket packed
with this appliance.
If the Anti-Tip device supplied with the range
does not fit this application, use the universal
Anti-Tip device WB2X7909.
-&WARNING -
• All ranges can tip
• Injury to persons could result
• Install Anti-Tip bracket packed
with range
• See Installation Instructions
If you pull the range out and away from the
wall for any reason, make sure the Anti-Tip
bracket is engaged when the range is pushed
back against the wall.
FOR YOUR SAFETY:
-&WARNING - Before beginning the
installation, switch power off at service panel
and lock the service disconnecting means to
prevent power from being switched on
accidentally. When the service disconnecting
means cannot be locked, securely fasten a
prominent warning device, such as a tag, to
the service panel.
31-10620 05-05 JR

GE Free-Standing Electric Range Specifications

General

Number of Elements	4
Hot Surface Indicator Lights	Yes
Self-Cleaning	Yes
Convection Cooking	No
Power Source	Electric
Voltage	240 V
Element 3 Size	6 inches
Oven Capacity	5.3 cu ft

Summary

Before You Begin Installation

Anti-Tip Device Requirement

Highlights the critical need to secure the range with an anti-tip bracket to prevent tipping hazards.

Prepare the Opening

Installation Dimensions and Clearances

Details required rough-in and spacing dimensions for walls, cabinets, and cooktop installation.

Electrical Connections

Electrical Requirements and Safety

Details necessary voltage, cord types, grounding, and safety precautions for electrical hookup.

Wiring and Code Compliance

Emphasizes using qualified electricians, adhering to local codes, and specific wiring requirements like 4-conductor.

Power Cord and Strain Relief Installation

Wire Connections

3-Wire Power Cord Installation

Procedure for connecting a 3-wire power cord to the terminal block, ensuring correct wire placement.

4-Wire Power Cord Installation

Conduit Installation

3-Wire Conduit Installation

4-Wire Conduit Installation

Install the Range

Anti-Tip Device Installation

Guidance on installing the anti-tip bracket and securing the range properly for safety.

Finalizing Range Installation

Final Installation Checklist

Operation Checklist