About Appliance Communication. GEAppliances.com
CleanSpeak"
Thiswasher can communicate with a compatible
dryer (one whose Owner's Manual contains a
CleanSpeak description) via a cable between these
appliances. Thiscable comes with a CleanSpeak
dryer models or may be purchased separately.
Dryer
Washer
At the end of the wash cycle, the washer sends a
signal to the dryer to indicated a preferred dry cycle.
When the dryer becomes idle ("End" display times
out - or- the door isopened) "CYCLE"will scroll
across its cycle time display, its current cycle knob
setting LEDwill be lit, and (ifdifferent) a second
recommended cycle LEDwill blink.If "CYCLE"times
out, pressing POWERwill refresh it and the LEDs.
If the dryer cycle knob isturned, the solid LEDwill
move accordingly. Pressingthe dryer STARTwill
initiate the cycle knob setting (solid LED)and turn off
the recommended (blinking LED)if a different cycle
isstarted.
Brillion Enabled Communication
Thiswasher (and/or compatible dryer)can
communicate with your Home Computer and/or
iPhone®. By using the GENucleusTM Home Energy
Manager and Appliance Communication Module
(ACH)you will be able to seethe following:
On your home computer or iPhone®:
• Which cycle is running and what its current cycle
segment is(example,"Spinning").
The estimated time remaining of the cycle that
has been selected.
When a cycle has completed.
Alerts notifying you ifthe washer needs
maintenance or servicing.
What your software allows you to do:
NOTE:Messages are displayed in English.See
vwwv.ge6rillion.com or call 1-800-220-6899 for
possible language options.
Cycle display will provide the current status of the
wash cycle:
Soak,Main Wash, Rinse,Spin or complete.
Alerts will notify you of problems. Some examples:
Longfill time
Not reaching water temperature target
Lidlock problem
Pressureswitch error
What you will need for two-way communication:
Nucleus home energy manager model
Appliance Communication Module model
Broadband connection with router (Wi-Fifor
iPhone® connection)
Computer (Mac® or PC)and/or Internet capable
iPhone®
NOTE:If you also have a compatible Energy Smart
dryer, see Installation Instructions for additional
parts.
installation
Step 1: Installyour Nucleus Home Energy Manger/
Cable- near your internet routen
Referto the Quick Start Guide/Installation
Instructions included with this devicefor
information needed to download software to a
desktop and/or iPhone®.
Step 2: Installyour Appliance Communication
Module (ACP1)inyour Laundry area. Determine
the most convenient location for your ACM.Install
the ACM according to the Quick Start/Installation
Instructions included with the device.
Step 3: Connect your ACHto your washer or dryer-
washen
Washer
- OR-
ACM
WoOer
TheACHcomes with a splitter,two 6' cables, and
a !' cable (seeParts and Accessories). tfyou also
have an Energy Smart dryer, usethe splitter to
connect both appliances. NOTE:tf the dryer did not
come with a 6 foot cable, you may needto purchase
a second 6 foot cable (seeParts and Accessories).
For more information or questions, pleasevisit:
www.ge6rillion.eom or call 1-800-220-6899.
To Next Page
Loading...
Need help?
General
