About the control panel-Quick start guide,
Controls(Cont.)
Load Size
- Forconvenience,bestperformanceand optimalefficiency,selectPreciseFill.Thisselectionautomaticallyprovidesthe correctamountof water suitedto
thesizeandtype ofloadplacedintheunit.NOTE:Thewasher will not fill with water when PreciseFifl is selected ifthe lid isopened.
- Ifyou prefertomanualtysetectthewater levet,depresstheLoadSizebuttonto highlightthedesiredselection.WhitePreciseFillisbestfor mostloads
andgeneralwashing,youmaywant to manuallyselecttheloadsizefor specialtyitemssuchasbulky,lightweightcomfortersorpillows,whereyou
wantto ensurea largerwater levetisapplied.Manualloadsizeselectionsshouldbemadefor wet itemsptacedin thewasher,suchas soakedtowetsor
garments.
- Somemodelsareequippedwith a "DeepFill"setting. Thisisidealforwashingbulkyitemsor whena maximumwater levelisdesired.
Power Press to "wake up" the display. If the display isactive, press to put the washer into idle mode.
NOTE: Pressing POWERdoes not disconnect the appliance from the power supply.
Start PressStart to begin the cycle.NOTE:The lid must be closed for the washer to fill and the cycle to start. PressingStart again will
Pause the cycle and the Cycleindicator light will blink.
To continue the cycle, pressStart again or closethe lid.If machine is paused more than 2/4hours,the cycle will be cancelled. To stop the
cycle, hold the pad for 3 seconds. If water remains in the machine, selectthe Drain & Spin cycle to drain tub and spin water out of the
washer tub.
Raising the lid will stop agitation or spin action but does not pause the cycle.
eWash (on some models) - When the eWash pad is pressed,the cycle changes to its most energy efficient settings. TheeMonitor
lightswill now illuminate to indicate the relative efficiency of the modified cycle.
Display (on some models) -The display shows the approximate time remaining untilthe end of the cycle.
NOTE:The cycle time is affected by how long it takes the washer to fill.Thisdepends on the water pressure in your home. The"smart" timer
"learns" the amount of time ittakes to fill your washer and adjusts the total time accordingly.
In addition, this display will, "scroll" the washer status:
• bALANCING Start of rebalancing cycle to redistribute clothes. Stops after rebalancing iscomplete.
• dELAY When Delayed Wash is initiated. Replacedwith estimated time when cycle starts.
End Endof current cycle.
FiLL Forthe first/45 seconds of a fill, the estimated end of cycle time isdisplayed. Forthe rest of the fill time, "FILL"is scrolled
untilthe fill completes.
LID Cycle stopped because lid isopen. Closethe lid.
• PAUSE Cycle paused because the Start/Pause pad was pressed and the washer was set to Pause.PressStart pad again to
restart the cycle.
Indicator lights Five LED lights indicate the current washer status moving from left to right as the cycle progresses.
To Next Page
Loading...
