– 72 –
In this example, FA has no fault counts.
Pressing the DOWN arrow button will step
through the individual fault codes and their
counts.
Fault code count of 3 shown.
Filter Light
Filter Light illuminates when:
• The sensors detect a blockage or the
accumulated run time of the compressor is
greater than 3000 hours.
• The control registers 5 fault counts. In the event
of a power loss, the fault code will decrease by 1
when power is restored.
When the lter light is illuminated, the sealed
system is locked out but the temperature and mode
LED stays at the set point.
(Continued Next Page)
To Next Page
Loading...
