Need help?Do you have a question about the GE GEH Series and is the answer not in the manual?
General| Brand | GE |
|---|---|
| Model | GEH Series |
| Category | Water Heater |
| Language | English |
Crucial safety guidelines for product operation and repair personnel.
Specific warnings about power disconnection and grounding device reconnection.
Details on safety glasses, gloves, and steel toe shoes for repairs.
Lists core technical details like capacity, voltage, and weight.
Details the one-year and ten-year warranty periods and what is covered.
Lists specific conditions and damages not covered under the warranty.
Specifies minimum clearances and environmental conditions for installation.
Details the 240VAC, 30 Amp, L1, L2, Ground requirements.
Covers pressure rating, discharge connection, and manual testing of the valve.
Details the control panel layout, buttons, and LED indicators.
Explains eHeat, Hybrid, Standard Electric, and High Demand modes.
Lists the five sensors and their general purpose in the system.
Table detailing sensor names, ranges, and resistance values.
Steps for powering on the water heater and initial display behavior.
Explains the control logic and fan operation for the eHeat mode.
Details the logic for using the upper and lower heating elements.
Explains the logic for combining eHeat and electric element usage.
Describes how the unit operates with high water usage demands.
Specifies tightening direction and torque for heating elements.
Explains TCO trip temperatures and their effect on heating sources.
Describes the switch's function, pressure limits, and reset behavior.
Describes the TXV's components and purpose of providing fixed superheat.
Defines superheat and its importance in TXV operation.
Critical instructions for attaching the TXV bulb to the copper tubing.
Describes the alert for heat pump failure and temporary operation mode.
Describes the alert for water system failure and temporary operation mode.
Describes the alert for system failure and automatic shutdown.
To Next Page
