Installation
Instructions
Refrigerator
GE Model 26
Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.ca
BEFORE YOU BEGIN
Readthese instructions completely and carefully.
• IMPORTANT- Savetheseinstructionsforlocal
inspector's use.
• IMPORTANT-Observe allgoverningcodesand
ordinances.
• NotetoInstaller-Besuretoleavetheseinstructionswith
theConsumer.
• Note to Consumer- Keepthese instructions for future
reference.
• Skill level- Installationof this appliance requiresbasic
mechanicalskills.
• Completion time- Refrigerator Installation
20 minutes
Water Line Installation
30 minutes
• Properinstallation isthe responsibilitUof the installer.
• Product failuredue to improper installation is not covered
under the Warrant U.
PREPARATION
MOVING THE REFRIGERATOR INDOORS
Ifthe refrigerator will not fit through a doorway,
the refrigerator doors and freezer drawer can be removed.
• Toremove the refrigerator door,see the Installing
the Rdrigerotor section.
• Toremove the freezer drawer,see the Removing
the FreezerDrawer section.
WATER SUPPLY TO THE ICEMAKER AND DISPENSER
Ifthe refrigerator has an icemaker,it will have to be
connected to a coldwater line.AGEwater supplUkit
(containingtubing, shutoff valve, fittings and instructions)
isavailable at extra cost from uour dealer,bUvisiting
our Website at GEApplionces.com (inCanada at
www.GEApplionces.ca)or from Partsand Accessories,
800.626.2002(inCanada1.800.661.1616).
15
TOOLS YOU MAY NEED
Adjustable Wrench
o@
1/4" Outer Diameter
Compression Nut
and Ferrule (sleeve)
3/32", 1/8", 3/16" and
4 mm Allen Wrenches
1/8" Drill Bit and
Electric or Hand Drill
3 :)})))'1
Pencil
Pliers
DIMENSIONS
70"1
I I
10 mm Socket
Ratchet/Driver
355/s''
/
Phillips-Head Screwdriver
Flat-Head Screwdriver
Tope Measure
1/4" Nut Driver
Level
Case Depth w/o
Doo[s 291/s"_
Height from
floor to hinge
cover top 687/8''
Additional Dimensions
To Next Page
Loading...
