To Next Page

To Previous Page

Getting started!

Load Dishwasher

For best dishwashing results, follow the loading guidelines found in the Loading the dishwasher section. No pre-rinsing of

normal food soil is required. Scrape off hard soils, including bones, toothpicks, skins, and seeds. Remove leafy vegetables,

meat trimmings, and excessive amounts of grease or oil.

Add Detergent

Add needed amount of detergent to the detergent dispenser. Use a detergent such as Cascade

Platinum Pacs. See Detergent

Dispenser in the Using the dishwasher section.

Add Rinse Agent

Add rinse agent such as Cascade

Complete Rinse Aid to the rinse agent dispenser. See

Use a Rinse Agent

in the Using the

dishwasher section.

Select Cycle

Close and latch the dishwasher door. The control panel lights will display the last settings selected. To change those settings, select the

desired cycle.

POTS & PANS This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils. This cycle

may not remove burned-on foods. Everyday dishes are safe to be used in this cycle.

Time: 1 hour 25 minutes.

NORMAL WASH

This cycle is for medium/heavily soiled dishes and glassware. Time: 1 hour 36 minutes.

LIGHT WASH

This cycle is for lightly soiled dishes and glassware. Time: 33 minutes.

RINSE ONLY This cycle is for rinsing partial loads that will be washed later. DO NOT use detergent or HEATED DRY

Option with this cycle. Time: 7 minutes.

Other manuals for GE GLDA696FSS

Questions and Answers:

Need help?

Do you have a question about the GE GLDA696FSS and is the answer not in the manual?

General