Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
About the unicouple.
8
Before Operating the Dishwasher the First Time
Attach the faucet adapter.
The special faucet adapter
supplied with your dishwasher must be assembled to
the sink faucet before you can use your dishwasher.
The faucet adapter is designed to fit standard spouts
having internal or external threads.
You will find the
adapter and two washers in the faucet adapter packet in
your dishwasher.
To install faucet adapter,
first remove the old aerator or
trim ring on your faucet spout.
If faucet has external threads:
Insert the thinner of the
two washers into the faucet adapter and attach it to the
faucet spout.
Tighten with pliers.
If faucet has internal threads:
Insert both of the washers
into the faucet adapter and attach it to the faucet spout.
Tighten with pliers.
If the faucet adapter threads do not match your faucet
spout, your local hardware or plumbing supply store
normally has additional fittings to adapt your faucet
spout to the special faucet adapter.
NOTE: A sink spray attachment hose can burst if it is installed
on the same sink with your dishwasher. We suggest that you
disconnect the sink spray attachment if your sink has one and
plug the hole.
To Next Page
Loading...
Need help?
General
