GE GSD3900 series - Operating Specific Dishwasher Cycles; Instructions for Short Wash, Rinse Only, Plate Warmer, and Start Delay

Start Delay
The START DELAY will allow you to delay the start time of any
cycle not on the Dial automatically for up to either 5 or 6 hours
(depending on the model).
SHORT
WASH
START DELAY
(HRS)
PLATE WARMER
(HEATED DRY ON)
(HEATED DRY OFF)
START
HOT START
OPTION
RINSE ONLY
OFF
2
4
3
5
6
1
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
About the dial cycles.
Short Wash
For quickly washing loads of everyday dishes with medium
soils that have not dried on.
SHORT
WASH
START DELAY
(HRS)
PLATE WARMER
(HEATED DRY ON)
(HEATED DRY OFF)
START
HOT START
OPTION
RINSE ONLY
OFF
2
4
3
5
6
1
Plate Warmer
For warming clean dishes and serving plates. This cycle will
take approximately 32 minutes.
SHORT
WASH
START DELAY
(HRS)
PLATE WARMER
(HEATED DRY ON)
(HEATED DRY OFF)
START
HOT START
OPTION
RINSE ONLY
OFF
2
4
3
5
6
1
10
Rinse Only
For rinsing partial loads that will be washed later. Do not use
detergent.
SHORT
WASH
START DELAY
(HRS)
PLATE WARMER
(HEATED DRY ON)
(HEATED DRY OFF)
START
HOT START
OPTION
RINSE ONLY
OFF
2
4
3
5
6
1
Be sure the door is
unlatched.
Select the wash cycle and
option you want.
Slowly turn the Dial to
desired time. The
CYCLE
ON
light will come on.
Latch the door to start
the cycle.
4
3
2
1
Load clean dishware
to be warmed.
Select
HEATED DRY.
Be sure the door is
unlatched.
Slowly turn the Dial
to
PLATE WARMER.
Latch the door to start
the cycle.
5
4
3
2
1
Make sure HEATED DRY
is not selected.
Be sure the door is
unlatched.
Slowly turn the Dial to
RINSE ONLY.
Latch the door to start
the cycle.
4
3
2
1
Select the NORMAL WASH
cycle and any options.
Be sure the door is
unlatched.
Slowly turn the Dial to
SHORT WASH .
Latch the door to start
the cycle.
4
3
2
1