71
DIMENSIONS AND SPECIFICATIONS
(for 22’ and 23‘ CustomStyle
™
models)
DIMENSIONS AND SPECIFICATIONS
Installation Instructions
INSTALLING THE REFRIGERATOR
REFRIGERATOR LOCATION
• Do not install the refrigerator where the
temperature will go below 60 ° F (16 ° C)
because it will not run often enough to
maintain proper temperatures.
• Do not install the refrigerator where the
temperature will go above 100°F (37 ° C)
because it will not perform properly.
• Install it on a oor strong enough to
support it fully loaded.
CLEARANCES
Allow the following clearances for ease
of installation, proper air circulation and
plumbing and electrical connections:
22’, 23‘ (33” wide),
22’, 23‘/25‘ CustomStyle
™
25‘, 26‘, 27‘, 29‘
Sides 1/8
" (4 mm) 1/8 " (4 mm)
Top 1
"
(25 mm) 1
"
(25 mm)
Back 1/2
"
(13 mm) 1
"
(25 mm)
70
1
⁄
4
"
(178.4 cm)
36
"
(91.4 cm)
24
" (61 cm)
24
"(61 cm)
Cabinet
Water Electrical
3/4
"
(19 mm) Airspace
(1/2" [13 mm] Gap +
1/4"[6 mm] Wall Plates)
25"(63.5 cm)
Countertop
DIMENSIONS AND SPECIFICATIONS
(for 25‘ CustomStyle
™
models)
*72
1
/4" (183.5 cm) required for full adjustment
of mobility wheels. If cabinets installed
above refrigerator have doors that are
ush to the top of the opening for the
refrigerator, then an additional 1/8" may be
required to provide clearance for cabinet
doors to open freely.
36"
(91.4 cm)
24
" (61 cm)
72
1
⁄4"(183.5 cm)*
71.0625" (180.5 cm)