To Next Page

To Previous Page

Installation Instructions

REVERSINGTHE DOOR SWING (CONT.)

[] TRANSFER FREEZERDOOR HANDLE

TO THE RIGHT (CONT.}

Stainless steel handle (on

some models):

O Attach the handle to the

fastener and tighten with

the 3/32" Allen wrench

(supplied),

0 Line up the handle _ ,_

with the screw holes in the

bottom of the door and

tighten the screws,

1--9-1RE-HANG THE REFRIGERATOR DOOR

Lower the refrigerator door onto the bottom hinge pin,

Plastic

Washer

Straighten the door and line it up with the center hinge

bracket,

Reinstall the center hinge pin with a 3/8" socket,

Turn it until it extends through the hinge bracket

and into the door,

PlasticWasher _

HingePin----e_l_

Center Hinge__l_

Bracket l

Refrigerator Door

ITO]RE-HANG THE FREEZER DOOR

Lower the freezer door onto the center hinge pin,

Be sure the washer is in place,

_ h Center HingePin

Plastic Washer_

Lift the top hinge so the pin fits into the door socket,

Support the door on the handle side and make sure the

door is straight and the gap between the doors is even

across the front, While holding the door in place, tighten

the top hinge screws,

GE GTH18DCDBRBB User Manual

Questions and Answers: