GE GTRS0 Series - Thermistor Values and Temperature Set Points

–
35
–
Thermistors
This main control board uses input from 3 thermistors. These thermistors are located in the fresh
food section, the freezer section, and on the evaporator. The main control board monitors the
thermistors to determine the temperature in these areas of the unit and determines which
components to run and when to run them, based on this information.
Thermistor Values
Temperature
Degrees (C)
Temperature
Degrees (F)
Resistance
in Kilo-ohms
-40 -40
166.8 kΩ
-30 -22
88 kΩ
-20 -4
48.4 kΩ
-10 14
27.6 kΩ
0 32
16.3 kΩ
10 50
10 kΩ
20 68
6.2 kΩ
30 86
4 kΩ
40 104
2.6 kΩ
50 122
1.8 kΩ
60 140
1.2 kΩ
Temperature Set Point Chart
Control
Setting
Fresh Food
Compartment
Freezer
Compartment
Fresh Food
Thermistor
Temperature Range
Freezer Thermistor
Temperature Range
Minimum Maximum Minimum Maximum
0 Off Off
1 44°F 6°F 43°F 45°F 1°F 11°F
2 40°F 4°F 39°F 41°F -1°F 9°F
3 39°F 3°F 38°F 40°F -2°F 8°F
4 38°F 1°F 37°F 39°F -4°F 6°F
5 37°F 0°F 36°F 38°F -5°F 5°F
6 36°F -1°F 35°F 37°F -6°F 4°F
7 35°F -3°F 34°F 36°F -8°F 2°F
8 35°F -4°F 34°F 36°F -9°F 1°F
9 34°F -6°F 33°F 35°F -11°F -1°F