– 9 –
3. After the handle has been removed, move
the small plug buttons to the opposite side of
the door and install in the screw holes.
4. Move the large plug button to the opposite
side of the door and install in the thimble
hole.
5. Move the front door plug button to the
opposite side of the door and install in the
screw hole.
Long Handle
Handle
Plug
Handle
Plug
Pin
Hole
Short Handle
6. Install the handle to the opposite side of the
door with 3 screws.
Note: If equipped with long handle, ensure that
pin in the lower part of the handle is installed in
bottom of the door.
7. Install handle plug.
To Next Page
Loading...
Need help?
General
