About Appliance Communication.
10
Energy Smart
TM
Energy Smart enables your washer to reduce
energy consumption during periods of high energy
costs. If you live in an area where your power
provider charges different rates at various times of
the day, your washer can inform you when you are
paying the highest rate. The (QHUJ\6PDUWicon will
illuminate on the washer control panel, the cycle
time will display “ES”, and the operation will be in
a delay mode. The washer will delay start (up to 4
hours) until the rate goes down. You can override
this feature by holding the 'HOD\:DVK button for
3 seconds to cancel and run it at your convenience
(immediately or delayed 1-9 hours).
:KDW\RXZLOOQHHG
6PDUW0HWHUWRFRPPXQLFDWHZLWK\RXUZDVKHU
(call your power provider)
$Q(QHUJ\6PDUWwasher (like this one)
$Q$SSOLDQFH&RPPXQLFDWLRQ0RGXOHACM)
,QVWDOODWLRQ
Step 1: Power provider installs a Smart Meter
Steps 2 & 3: Install an ACM. See the Brillion Enabled
Communication section.
To Next Page
Loading...
Need help?
General
