To Next PageTo Next Page
Need help?Do you have a question about the GE HVM1750SP1SS and is the answer not in the manual?
Example of one possible ductwork installation for outside top exhaust.
Example of one possible ductwork installation for outside back exhaust.
List of hardware components included in the installation package.
List of additional parts provided with the microwave oven.
Steps for safely removing the microwave oven from its carton and detaching the mounting plate.
Methods for identifying wall studs to ensure secure mounting of the plate.
Guidance on positioning the wall plate under various cabinet types for proper alignment.
Instructions for marking and drilling holes for the wall plate based on cabinet type and stud location.
Details for installing the microwave with a vertical duct for outside exhaust.
Details for installing the microwave with a horizontal duct for outside back exhaust.
Instructions for installing the microwave for recirculating air without external venting.
Overview of the steps involved in installing the microwave for outside top exhaust.
Steps for securely attaching the mounting plate to the wall for top exhaust.
Using the template to drill holes in the top cabinet for screws and the exhaust adaptor.
Ensuring the damper pivots freely and is properly seated before mounting the microwave.
Steps for lifting and securing the microwave oven to the mounting plate and cabinet.
Adjusting the exhaust adaptor to connect properly with the house ductwork.
Extending and sealing the house duct to the exhaust adaptor for proper ventilation.
Overview of the steps for installing the microwave with a horizontal duct for back exhaust.
Cutting an opening in the rear wall for the outside back exhaust duct.
Steps for securely attaching the mounting plate to the wall for back exhaust.
Using the template to drill holes in the top cabinet for screws and the power cord.
Modifying the blower unit and its wiring for the outside back exhaust configuration.
Steps for lifting and securing the microwave oven to the mounting plate and cabinet.
Overview of the steps for installing the microwave for non-vented recirculating air.
Steps for securely attaching the mounting plate to the wall for recirculating installation.
Modifying the blower unit and its wiring for the recirculating air configuration.
Steps for lifting and securing the microwave oven to the mounting plate and cabinet.
Instructions for removing the front panel and installing the charcoal filter.
Confirm that the microwave oven has been installed correctly according to all instructions.
Ensure all internal and external packing materials are removed from the microwave oven.
Place the turntable and support ring inside the microwave cavity.
Turn the main power back on by replacing the fuse or resetting the circuit breaker.
Plug the microwave's power cord into a properly grounded, dedicated electrical outlet.
Refer to the Owner's Manual for detailed information on features and operation.
Retain the installation instructions for inspection by local authorities or inspectors.
General| Type | Over-the-Range Microwave |
|---|---|
| Capacity | 1.7 cu. ft. |
| Power Output | 1000 Watts |
| Control Type | Electronic Touch |
| Weight | 63 lbs |
| Turntable | Yes |
| Sensor Cooking | Yes |
| Color | Stainless Steel |
| Pre-programmed Settings | Yes |
| Child Lock | Yes |
| Cooking Modes | Microwave |
