EasyManua.ls Logo

GE IC3645SR4U454Z2 - Page 25

GE IC3645SR4U454Z2
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DIAGNOSTIC STATUS CODES
SX TRANSISTOR CONTROL Page 25
January 1999
TRACTION
STATUS CODE
DESCRIPTION OF STATUS CAUSE OF STATUS INDICATION
-05
Start switch or brake switch fails to
close.
This status code will be displayed when P7 is less
than 2.5 volts and P3 is less than 60% of battery volts.
MEMORY RECALL
NO
CORRECTIVE ACTIONS TROUBLE-SHOOTING DIAGRAM
Circuits valid
for
Traction
Controller
SYMPTOM
Control will not operate.
POSSIBLE CAUSE
Defective brake switch circuit.
= Check brake switch to insure closure with
brake pedal released.
= Check for open circuit or loose connections in
wiring from brake switch to seat switch and
from P6, and from brake switch to start switch.
Defective start switch circuit.
= Check start switch to insure closure when
accelerator is depressed.
= Check for open circuit or loose connections in
wiring from brake switch to start switch and
from P3 to start switch.
Defective accelerator switch.
= Check accelerator switch potentiometer for
proper operation and ohmic value.
KEY
SWITCH
BRAKE
SWITCH
REVERSE SW.
FORWARD SW.
SEAT SWITCH
L
START SW.
P8
P7
ACCPOT
P9
P1 P2 P3
P17 P5P4P6
TRACTION
STATUS CODE
DESCRIPTION OF STATUS CAUSE OF STATUS INDICATION
-06
Accelerator depressed with no
direction selected.
This status code will be displayed when P4 and P5
are less than 60% of battery volts, and P7 is less than
2.5 volts.
MEMORY RECALL
NO
CORRECTIVE ACTIONS TROUBLE-SHOOTING DIAGRAM
Circuits valid
for
Traction
Controller
SYMPTOM
Control will not operate.
POSSIBLE CAUSE
Accelerator pedal is depressed before closing
forward or reverse directional switch.
= Status code will disappear when directional
switch is closed or when accelerator pedal is
released.
Defective directional switch
= Check forward or reverse switch to insure
closure when direction is selected.
Open circuit between directional switch(es) and
battery positive or between directional switch(es)
and P4 or P5.
= Check all control wires and connections shown
in Trouble Shooting Diagram.
KEY
SWITCH
BRAKE
SWITCH
REVERSE SW.
FORWARD SW.
SEAT SWITCH
L
START SW.
P8
P7
ACCPOT
P9
P1 P2 P3
P17 P5P4P6

Table of Contents

Related product manuals