Need help?Do you have a question about the GE VersaMax IC200CHS022 and is the answer not in the manual?
General| Brand | GE |
|---|---|
| Model | VersaMax IC200CHS022 |
| Category | Controller |
| Language | English |
Covers programming, data functions, memory, and communication interfaces.
Inspect shipping containers for damage and record serial numbers after unpacking.
Specifies required clearance for modules for optimal thermal performance.
Details on mounting racks on DIN rails and panel mounting for vibration resistance.
Instructions for installing the ETM module to the left of a CPU or NIU.
Guide for installing ERM modules in expansion racks, selecting rack ID, and attaching cables.
Guidance on installing power supply modules on CPU, NIU, ERM, or booster carriers.
Details on wire gauge, grounding DC and AC power supplies.
Proper grounding of control system components and devices in a star fashion.
Guidance on wiring to inductive loads, including AC and DC inductive loads.
Instructions for installing modules onto carriers, including setting carrier keying.
Used to expand VersaMax PLC or NIU I/O station to include up to seven additional racks.
Interfaces an expansion rack to a VersaMax PLC or NIU I/O station system, providing 500 V DC isolation.
Interfaces an expansion rack to a VersaMax PLC or NIU I/O station system, with a 15m maximum cable length.
Provides 8 discrete outputs with electronic overcurrent and short circuit protection; requires external DC power.
Provides 16 discrete outputs, positive or sourcing type; requires external DC power to switch loads.
Provides 16 discrete outputs with electronic overcurrent and short circuit protection; requires external DC power.
Provides two groups of 16 discrete outputs with electronic overcurrent/short circuit protection; requires external DC power.
Provides 16 discrete outputs, negative or sinking type; requires external DC power to switch loads.
Provides two groups of 16 discrete outputs, negative or sinking type; requires external DC power to switch loads.
Provides two groups of 16 discrete outputs, positive or sourcing type; requires external DC power to switch loads.
Provides 8 individually-isolated Form A relay outputs; loads must be powered by an external source.
Provides 16 individually-isolated Form A relay outputs; loads must be powered by an external source.
Provides 20 discrete inputs and 12 relay outputs; inputs are positive logic, outputs are Form A relays.
Provides 16 discrete outputs w/ESCP and two groups of 8 discrete inputs; supports positive/negative logic.
Provides 16 discrete outputs w/ESCP and two groups of 8 discrete inputs; supports positive/negative logic.
Provides 10 discrete inputs and 6 relay outputs; inputs positive logic, outputs Form A relays.
Provides 16 discrete outputs and two groups of 8 discrete inputs; outputs positive, inputs positive logic.
Provides 8 isolated relay outputs and two groups of 8 discrete inputs; supports positive/negative logic inputs.
Provides 8 discrete inputs and 8 relay outputs; inputs are positive logic, outputs are Form A relay.
Provides 8 discrete inputs and 8 relay outputs; inputs are positive logic, outputs are Form A relay.
Provides 8 discrete inputs and 8 discrete outputs; inputs positive logic, outputs individually isolated.
Provides 8 isolated discrete inputs and 8 relay outputs; inputs positive logic, outputs Form A relays.
Provides 4 isolated discrete inputs and 8 relay outputs; inputs positive logic, outputs Form A relays.
Provides two groups of 8 discrete inputs and one group of 16 discrete outputs; supports positive/negative logic inputs.
Provides four current inputs and two current outputs, configurable for 4-20mA or 0-20mA.
Provides four voltage inputs and two voltage outputs, range 0 to +10 V DC.
Provides four analog voltage inputs and two analog voltage outputs, range -10 to +10 V DC.
Module with 20 inputs, 12 outputs, and 4 configurable HSC, PWM, or Pulse Train points.
Summarizes maximum current for load types and typical contact life.
To Next Page