EasyManua.ls Logo

GE prolec VR-1

GE prolec VR-1
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation, Operation and Maintenance
Manual for Type VR-1™ Single-Phase,
Step Type Regulators
Question and Answer IconNeed help?

Do you have a question about the GE prolec VR-1 and is the answer not in the manual?

GE prolec VR-1 Specifications

General IconGeneral
BrandGE
Modelprolec VR-1
CategoryController
LanguageEnglish

Summary

Letter of Guarantee

Introduction

Receiving

Shipping Damage

Procedures for reporting damage upon receipt of the regulator.

Storing

Guidelines for storing the regulator if not installed immediately.

Warranty

Details regarding the product warranty period and terms.

Installation

Inspecting

Initial checks of the regulator before installation.

Sealed-Tank Regulator

Details specific to sealed-tank regulator design and handling.

Checking Regulator Controls & Control Settings Prior to Energization

Verifying control settings before applying power.

Exciting the Regulator High Voltage Windings from an External Supply

Procedures for energizing high voltage windings using an external source.

Mounting

Instructions for physically mounting the regulator unit.

Surge Protection

Guidance on installing surge arresters for protection.

Three-Phase Connections

Describes connection methods for three-phase configurations.

Short-Circuit Rating

Information on the regulator's short-circuit capacity.

Overloading Single-phase Step Voltage Regulators

Guidelines for operating the regulator beyond its rated current.

Power Connections

Procedures for making electrical power connections to the regulator.

Connecting Into Service

Step-by-step guide for bringing the regulator online.

Removing from Service

Procedures for safely taking the regulator offline.

Test for Phase Sequence

Method for testing and verifying phase sequence in a system.

Voltage Regulator for Grounded-Y Circuits

Specifics for connecting regulators in grounded-Y circuits.

Other Than Rated Voltage

Adjustments for operating the regulator at voltages other than its rating.

Handhole Cover Removal

Steps for safely removing the handhole cover for access.

Handhole Cover Installation

Procedures for correctly reinstalling the handhole cover.

Voltage Regulator PT Ratio

Source PT Ratio Test

Steps to test the PT ratio for the source side.

Load PT Ratio Test

Steps to test the PT ratio for the load side.

Operation

Control Interface Instructions

How to use and interpret the regulator's control interface.

Load Bonus Feature

Explanation of the load-bonus feature for increased capacity.

Removing the Indicator Dial Assembly

Steps for removing the indicator dial for maintenance or adjustment.

Maintenance

Inspecting the Regulator while Energized

Procedures for checking the regulator's operation while powered.

Untanking

Steps for safely removing the regulator's tank cover and internals.

Replacing the Internal Clamp Bushing

Instructions for replacing internal clamp bushings.

Contact Inspection

Guidance on inspecting and assessing the condition of contacts.

Trouble Shooting

Control Interface Test Points

Identifying test points on the control interface for diagnostics.

Typical Diagrams

Illustrative diagrams for understanding system connections and components.

Parts List

Locations

Related product manuals