GE EV100 LX

1
INSTRUCTIONS
EV100 LX/LXT SCR
CONTROLS
GEH-5714
The information contained herein is intended to assist truck users and dealers in the servicing of SCR controls furnished
by the General Electric Company. It does not purport to cover all variations in equipment nor to provide for every possible
contingency to be met with installation, operation or maintenance.
Should further information be desired or should particular problems arise which are not covered sufficiently for the
purchaser's purpose, the matter should be referred to the truck manufacturer through his normal service channels, not directly
to the General Electric Company.
September 1993
GE Electric Vehicle
Systems

GE EV100 LX Specifications

General

Brand	GE
Model	EV100 LX
Category	Controller
Language	English

Summary

EV100 LX SCR Control Ordering Information

EV100 LX Part Number Identification

Terminal Connections for Logic Cards

EV100 LX Logic Card Specifications

Basics of Circuit Operation

Hydraulic SCR Control (EV100 P)

General Maintenance Instructions

Maintenance Dos and Donts

Lists essential actions to perform and avoid during maintenance for safety and longevity.

Troubleshooting Instructions

Troubleshooting Status Codes

Checking Components

Component Testing Procedures

Details methods for testing capacitors, contactors, potentiometers, SCRs, and rectifiers.

Replacement of EV-100 Components

EV100 Handset Operation

Function Set-Up Procedures

Details how to access and adjust control functions using the handset's set-up mode.

Function Numbers for Control Cards (IC3645 EVLXCD1 TTTX)

Plugging Distance (Current)

Adjusts the plugging distance by setting the current level for deceleration.

1 A Drop Out Current

Configures the current level at which the 1A contactor drops out to limit torque.

Function Numbers for Control Cards (Continued)

Card Type Selection

Selects the appropriate logic card type for the vehicle application.

Speed Limit 1 (PA5 OR PA6)

Regen Braking CL

Adjusts the current limit for regenerative braking to control stopping distance.

Pedal Position Plug

Function Numbers for Control Cards (IC3645 EVLXCD1 MTMX)

Current Limit Adjustment

Sets the maximum current limit for the control to protect the motor.

Function Numbers for Control Card IC3645 EVLXCD 1 PX

Controlled Acceleration and 1 A Time

Configures acceleration rate and 1A contactor timing for smooth operation.

Speed Limit 1 (SL1)

Sets a maximum speed limit based on the SL1 switch input.

EV200 LX Supplement General Information

EV200 LX Supplement Current Limit Adjustments