Need help?Do you have a question about the GE RSTi-EP and is the answer not in the manual?
General| Model/Series | RSTi-EP |
|---|---|
| Input Voltage/Power Supply | 24V DC |
| Communication | Ethernet |
| Mounting | DIN Rail |
| Programming Language | IEC 61131-3 (LD, FBD, ST, IL, SFC) |
| Ethernet Ports | 2 x 10/100/1000 Mbps |
| Certifications | CE, UL, cUL, ATEX, IECEx |
| Communication Protocols | Ethernet/IP, Modbus TCP |
| Number of I/O | Up to 64 I/O |
| Memory | 4 GB Flash |
| USB Ports | 1 x USB 2.0 |
| Operating Temperature | -20°C to 60°C |
Provides a high-level overview of the RSTi-EP system components and architecture.
Outlines general safety instructions for handling RSTi-EP products and potential risks.
Provides critical safety notes and requirements for operating in potentially explosive environments.
Details current consumption of modules and power supply considerations, including derating.
Provides an overview of editable parameters for various network adapters.
Outlines principles and measures for ensuring electromagnetic compatibility of the RSTi-EP modules.
Explains how to view and modify network adapter parameters and settings through the web interface.
Troubleshooting guide for fieldbus network adapters, detailing LED status and recommended actions.
Troubleshooting guide for I/O modules, explaining LED status and recommended actions for various error conditions.
Emphasizes the importance of proper grounding for the CPE100 unit and its connection to the DIN rail.
To Next Page
