GE RSTi-EP - Empty Slot Module Ep-8310

Chapter 5 Detailed Descriptions of I/O Modules
GFK-2958E RSTi-EP User Manual 310
5.38 Empty Slot Module EP-8310
Empty Slot Module EP-8310
Empty slot modules can be integrated as reserve modules in a station. They bridge all contacts in the
basic module 1:1 and otherwise have no function. Empty slot modules are passive modules without
fieldbus communication, therefore they are not considered during configuration.
Note: A maximum of three passive modules (power-feed module, potential distribution module, and
empty slot module) may be installed in succession, however the next module to be installed
must be an active module.
Specifications EP-8310
General data
Weight
70 g (2.47 oz)
For additional general data, refer to the section, General Technical Data for I/O Modules.