GFK-2958E RSTi-EP User Manual 376
➢ To accept an individual change: Click on Apply changes.
➢ To accept all changes: Click OK.
9.9.5 Modules with Registers
Modules with registers (for example, counter modules and PWM modules) can be forced individually.
➢ To force individual modules with registers
1. Click on the channel that needs to be forced, enter the required value, and click Apply
Changes.
9.9.6 Ending/Deactivating Forced Operations
➢ To cancel a forced operation: Click Restore. All of the changes you made will not have any
effect.
➢ To deactivate Force mode: Click Disable.
To Next Page
Loading...
