GFK-2958E RSTi-EP User Manual 348
Select modules from the list and drag them to their slot locations in the remote node.
(If you need to delete a module on the left, select it and press the keyboard Delete key). When the
modules on the left are correct, click OK to add them to the configuration.
8.2.3 Configuring EPXPNS001 Module Parameters
After adding RSTi-EP modules to the remote node, their parameters must be configured. For all
EPXPNS001 modules, this includes configuring a set of basic parameters (such as: reference address,
length, general parameters).
To Next Page
Loading...
