GFK-2958E RSTi-EP User Manual 353
8.3.3 Configuring DP-V1 Settings for a Slave
Whether or not a slave device supports DP-V1 functions is indicated in the GSD file provided by the
vendor of that device. For devices that do provide DP-V1 functions, support is disabled by default.
➢ To enable DP-V1:
1. From the Project Navigator, right-click the Slave and select Properties.
2. In the Properties window, click the ellipsis (…) in the DPV1 Settings field. The PROFIBUS DPV1
Setup dialog box displays.
To Next Page
Loading...
