GE RSTi-EP

Chapter 5 Detailed Descriptions of I/O Modules
GFK-2958E RSTi-EP User Manual 263
5.26 Analog Output Module EP-4164
Analog Output Module EP-4164 Connection Diagram EP-4164
The analog output module EP-4164 can control up to four analog actuators with ±10 V, ±5 V, 0-10 V,
0-5 V, 2-10 V, 1-5 V, 0-20 mA or 4-20 mA. The resolution is 16 bit per channel. An output can be
connected to each connector, the internal switching is carried out automatically. The output range is
defined using parameterization. A status LED is assigned to each channel. The outputs are supplied
with power from the output current path (I
OUT
).
Caution
The outputs as well as the sense-lines of the AO modules must not be used
as power outputs.