GFK-2958E RSTi-EP User Manual 302
5.34 Potential Distribution Module for Output Current Path
EP-751F
Potential Distribution Module for Connection Diagram EP-751F
Output Current path EP-751F
The potential distribution module EP-751F provides 16 connections for +24 V from the output current
path. Potential distribution modules are passive modules without fieldbus communication, therefore
they are not considered during configuration.
Note: A maximum of three passive modules (power-feed module, potential distribution module, and
empty slot module) may be installed in succession, however the next module to be installed
must be an active module.
To Next Page
Loading...
