GE RSTi-EP - Page 305

Chapter 5 Detailed Descriptions of I/O Modules
GFK-2958E RSTi-EP User Manual 301
The potential distribution module EP-711F provides 16 connections for +24 V from the input current
path. Potential distribution modules are passive modules without fieldbus communication, therefore
they are not considered during configuration.
Note: A maximum of three passive modules (power-feed module, potential distribution module, and
empty slot module) may be installed in succession, however the next module to be installed
must be an active module.
EP-711F
Block Diagram EP-711F
Specifications EP-711F
Supply
Supply voltage
20.4V – 28.8V
General data
Weight
84 g (2.96 oz)
For additional general data, refer to the section, General Technical Data for I/O Modules.