GE RSTi-EP - 9.6 Displaying and Editing the Network Adapter Status

Chapter 8 Web Server
GFK-2958E RSTi-EP User Manual 368
9.6 Displaying and Editing the Network Adapter Status
Note: These functions are only accessible when Force mode is not activated.
Note: The status data can be displayed at all times, regardless of the state of the field bus
connection. Setup changes can only be stored while the field bus is not active.
➢ To display and edit the network adapter status: Click on the network adapter. The
Network Adapter Status dialog box displays.
From here you can:
• Reset the network adapter to factory default settings
• Change the registration data and set up password protection to limit access to the web
server
• Reset any changes that have been made
• Access the network adapter parameters
• Access the network adapter's datasheet (link to product designation)