GFK-2958E RSTi-EP User Manual November 2017 382
Replacing Components
10.1 Removing/Replacing the Plug-in Unit
Explosion Risk - Prior to starting work, ensure that there is not a
potentially explosive atmosphere.
All work on the RSTi-EP station must be carried out with the power supply
disconnected. Ensure that the place of installation (switch cabinet and
such) has been disconnected from the power supply.
The components in the RSTi-EP series can be destroyed by electrostatic
discharge. Ensure that personnel and work equipment are adequately
earthed!
➢ To remove/replace the plug-in unit
1. Unlock the connector frame.
2. Swivel the plug-in unit with the cabling towards the front by 90°.
To Next Page
Loading...
