GFK-2958E RSTi-EP User Manual 363
9.3.1 Activating the Ethernet Socket
➢ To activate the Ethernet socket
1. In the station view, click on the Network Adapter and then Parameters.
2. Scroll down the list of parameters until you see the entry Web server via Ethernet.
3. Change the setting to enabled.
4. Enter the required IP address and Subnet mask.
5. Click Apply Changes to confirm.
6. Close the network adapter window and restart the network adapter. You can review the IP
address in Windows Control Panel, in the Network and Sharing Center.
7. Under Unidentified network, click on LAN connection. The LAN Connection Status window
displays.
8. Click Details. The Network Connection Details window opens.
To Next Page
Loading...
