GFK-2958E RSTi-EP User Manual 308
5.37 0-V Potential Distribution Module for Output Current Path
EP-750F
0-V Potential Distribution Module for Connection Ciagram EP-750F
the Output Current Path EP-750F
The potential distribution module EP-750F provides 16 connections for ground from the output
current path. Potential distribution modules are passive modules without fieldbus communication,
therefore they are not considered during configuration.
Note: A maximum of three passive modules (power-feed module, potential distribution module, and
empty slot module) may be installed in succession, however the next module to be installed
must be an active module.
To Next Page
Loading...
