GE RSTi-EP

Chapter 4 Detailed Descriptions of the Fieldbus Network Adapters
GFK-2958E RSTi-EP User Manual 58
Caution
In the case of a maximum power supply of >8 A and a maximum temperature of >
+55°C (131 °F), all four contacts must be connected with 1.5 mm² wiring.
4.1.4 Specifications
EPXPBS001
System data
Connection
9-pole SUB-D socket
Fieldbus protocol
PROFIBUS-DP V1
Process image
Input data width
max. 244 bytes
Output data width
max. 244 bytes
Parameter data
max. 244 bytes
Diagnostic data
max. 244 bytes
Number of modules
Max. 64 active
Configuration interface
Micro USB 2.0
Transfer rate
Fieldbus
Max. 12 Mbps
RTSi-EP system bus
Max. 48 Mbps
Supply
Supply voltage for system and inputs
20.4V – 28.8V
Supply voltage for outputs
20.4V – 28.8V
Max. feed-in current for input modules
10 A
Max. feed-in current for output modules
10 A
Current consumption from system current path I
SYS
100 mA
Connection data
Type of connection
Spring style
Conductor cross-section
Single-wired, fine-wired
0.14 – 1.5 mm2 (AWG 16 – 26)
Weight
Operating temperature
-20°C to +60°C (-4 °F to +140 °F)
Storage temperature
-40°C to +85°C (-40 °F to +185 °F)
Air humidity (operation/transport)
5% to 95%, noncondensing as per DIN EN 61131-2
Width
52 mm (2.05 in)
Depth
76 mm (2.99 in)
Height
120 mm (4.72 in)
Weight
223 g (7.87 oz)
Configuration
The GSD file is available on the Support website
http://support.ge-ip.com for download and import into Proficy
Machine Edition. The GSD supporting a firmware release is part
of the firmware upgrade kit available on the Support website.
General data, refer to the Section, General Technical Data for the Fieldbus Network Adapter