GFK-2958E RSTi-EP User Manual 306
5.36 0-V Potential Distribution Module for Input Current Path
EP-710F
0-V Potential Distribution Module for Connection Diagram EP-710F
the Input Current path EP-710F
The potential distribution module EP-710F provides 16 connections for ground from the input current
path. Potential distribution modules are passive modules without fieldbus communication, therefore
they are not considered during configuration.
Note: A maximum of three passive modules (power-feed module, potential distribution module, and
empty slot module) may be installed in succession, however the next module to be installed
must be an active module.
To Next Page
Loading...
