GE AF-300 P11 User Manual

GEI-100364D
Supersedes GEI-100364C
070730
FERGADV
GE Consumer & Industrial
41 Woodford Avenue, Plainville, CT 06062
www.geelectrical.com
GE Consumer & Industrial
AF-300 P11
User’s Guide
GE Consumer & Industrial AF-300 P11 User’s Guide GEI-100364D

GE AF-300 P11 Specifications

General

Category	Controller
Input Frequency	50/60 Hz
Cooling Method	Forced Air
Humidity	5% to 95% (non-condensing)
Enclosure Rating	IP20
Output Voltage	0-Input Voltage
Output Frequency	0-400 Hz
Control Method	PWM Control
Protection Features	Overcurrent, Overvoltage, Overtemperature, Short Circuit
Communication Interface	RS485
Operating Temperature	-10 to 50°C
Storage Temperature	-20 to 65°C
Dimensions	Varies by model
Weight	Varies by model

Summary

Safety Instructions

Instructions on Wiring

Safety precautions for wiring the drive correctly.

Instructions on Operation

Safety guidelines for operating the drive.

Instructions on Maintenance, Inspection, and Replacement

Safety advice for maintenance, inspection, and replacement tasks.

1. Before Using This Product

2. Installation Environment and Connection

2.1 Operating Environment

2.2 Installation Method

Steps and considerations for physically mounting the drive.

2.3 Connection

Instructions for connecting the drive's main circuit and control terminals.

2-3-1 Basic Connection

Fundamental steps for making basic electrical connections.

2.3.1 Basic Connection Diagram (Sink Logic)

Basic Connection Diagram to PLC (Sink Logic)

Basic Connection Diagram (Source Logic, Typically used in Europe)

2.3.2 Connecting the Main Circuit and Ground Terminals

Detailed instructions for connecting main circuit and ground terminals.

2.3.3 Connecting the Control Terminals

Instructions for connecting control circuit terminals.

2.3.4 Terminal Configuration

2.3.5 Drive Cable Size, Tightening Torque & Circuit Protection Rating

Specifications for drive cable size, torque, and protection ratings.

3. Operation

3.1 Inspection and Preparation Before Operation

Checks and preparations required before starting drive operation.

3.3 Trial Run

Steps for performing an initial trial run of the drive.

4. Keypad Panel

4.2 Operation From the Keypad Panel (LCD Screen, Level Structure)

How to navigate and operate the drive using the keypad's LCD screen.

4.3 Entering Data on the Keypad Panel

How to input and modify data using the keypad panel.

4.3.4 Program Menu Screen

4.3.5 Setting Function Data

Procedures for setting and modifying function data.

4.3.7 Monitoring Operating Status

4.3.9 Maintenance Information

4.3.11 Alarm Information

How to view detailed alarm information and operating data at the time of an alarm.

4.3.12 Alarm History and Factors

4.3.14 Alarm Mode

5. Function Selection

5.1 Function Selection List

A comprehensive list of all drive functions with their codes and parameters.

5.3 Function Explanation

Detailed explanations of fundamental drive functions (F00, F01, F02).

Motor 1 (P: Motor Parameters)

P04 Motor 1 (Tuning)

6. Protective Operations

6.1 List of Protective Functions

A table listing all protective functions, their LED/LCD display, and causes of activation.

6.2 Alarm Reset

Procedures for resetting trip status and alarms.

7. Troubleshooting

7.1 Activation of Protective Function

Troubleshooting flowcharts for common protective function activations.

7.2 Abnormal Motor Rotation

Troubleshooting steps if the motor does not rotate.

8. Maintenance and Inspection

8.2 Periodic Inspections

Procedures for detailed periodic inspections after stopping operations.

8.5 Replacement Parts

Recommended replacement parts and their standard service life.

9. Warranty Parts and Service

WARRANTY COVERAGE

11. Specifications

11.1 Standard Specifications

Standard technical specifications for 230V and 460V series drives.

12. RS485 Modbus RTU Serial Communications

12.2 Connection

12.3 Serial Interface Configuration

12-7 Communication Errors

14. Electromagnetic Compatibility (EMC)

14.2 Recommended Installation Instructions