GE JBS05 Owner's Guide

Using the surface units.
*7A>D67>DCC78B<0=D0;540CDA4B0=30??40A0=24<0HE0AH5A><H>DA<>34;
6
Be sure you turn the control knob
to Off when you finish cooking.
How to Set
Indicator Lights
>=A0380=C6;0BB<>34;B>=;H
A HOT SURFACE or HOT COOKTOP
(depending on model) indicator light will glow
when any radiant element is turned on and
will remain on until the surface is cool
enough to touch.
A SURFACE UNIT on or BURNER ON
(depending on model) indicator light will glow
when any surface unit is on.
NOTE: *74SURFACE UNIT >ABURNER ON
8=3820C>A;867C<0H6;>F14CF44=C74BDA5024
2>=CA>;B4CC8=6B>5Lo 0=3Off1DCC74A48B=>
?>F4AC>C74BDA5024D=8CB
Push the knob in and turn in either direction
to the setting you want.
At both Off and Hi the control clicks
into position. You may hear slight clicking
sounds during cooking, indicating the control
is keeping the power level you set.
Consumer Support Troubleshooting Tips
Care and Cleaning
Operating Instructions
Safety Instructions
Dual Surface Unit and Control Knob
>=B><4<>34;B
*74A867C5A>=CBDA5024D=8C70B2>>:8=6
B8I4BO0=3O>AO0=3OC>B4;42C5A><
B>H>D20=<0C27C74B8I4>5C74D=8CC>C74
B8I4>5C742>>:F0A4H>D0A4DB8=6
To use the small surface unit, turn the
control knob ".4-3$1"+."*6(2$ to the
SMALL BURNER settings.
To use the large surface unit, turn the
control knob "+."*6(2$ to the LARGE
BURNER settings.
On some models.
On some models.

GE JBS05 Specifications

General

Brand	GE
Model	JBS05
Category	Ranges
Language	English