To Next PageTo Next PageWhat to do if surface units do not work on my GE Ranges?
If the surface units on your GE Ranges aren't heating up properly, start by checking the fuse in your home or circuit breaker and replace/reset if necessary. Also, ensure that the cooktop controls are correctly set for the surface unit you're trying to use.
What to do if GE JBS160DMWW oven door will not open after a clean cycle?
If the door on your GE Ranges oven won't open after a clean cycle, it's likely that the oven is still too hot. Allow the oven to cool down below the locking temperature, and then try opening the door again.
Why is the DOOR LOCK light on when I want to cook with my GE Ranges?
If the DOOR LOCK light is on when you want to cook on your GE Ranges, it means the oven door is locked because the temperature inside the oven hasn't dropped below the locking temperature. To resolve this, press the Cancel/Off pad and allow the oven to cool down completely.
What to do if coil surface units do not work properly on GE JBS160DMWW Ranges?
If the coil surface units on your GE Ranges aren't working correctly, ensure they are fully plugged into the receptacle with the controls off. Check that the correct control is set for the unit you are using. Also, make sure the drip pans are securely set in the cooktop, aligning the opening with the receptacle. Check your home's fuse or circuit breaker, and if the Sensi-Temp Technology sensor cap is soiled, clean it according to the range cleaning instructions. If the sensor cap is stuck, contact a qualified technician for replacement.
How to make GE Ranges surface units maintain a rolling boil?
If your GE Ranges surface units aren't maintaining a rolling boil or cooking seems too slow, first, make sure you're using flat pans that match the diameter of the surface unit. Also, covering the pan with a lid can help to retain heat until the desired temperature is reached, especially if the power voltage in your area is low.
Why does the display go blank on my GE JBS160DMWW?
If the display on your GE Ranges goes blank, check the fuse in your home or reset the circuit breaker. It's also possible the clock is turned off, so check the special features section for instructions. Lastly, verify the oven isn't in Sabbath Mode by consulting the special features section.
What does it mean when “LOCK DOOR” flashes in the display of my GE JBS160DMWW Ranges?
If “LOCK DOOR” flashes in the display of your GE Ranges, it indicates that the self-clean cycle has been selected, but the oven door isn't fully closed. Ensure the oven door is completely closed to start the self-clean cycle.
Why does food not bake properly in my GE JBS160DMWW oven?
If your GE Ranges oven isn't baking food properly, consult the Cooking Modes section for proper oven control settings. Ensure the rack position is correct and level, referring to the Cooking Modes section and Cooking Guide. Verify you're using the correct cookware of the appropriate size, as detailed in the Cookware section. Adjust the oven temperature as needed, consulting the Special Features section. Keep in mind that ingredient substitutions can also affect the outcome.
How to adjust oven temperature too hot or too cold on GE JBS160DMWW Ranges?
If your GE Ranges oven temperature is too hot or cold, you may need to adjust the oven temperature. See the Special Features section or adjust the thermostat on models with an oven temperature knob.
Why does my GE Ranges oven sometimes take longer to preheat to the same temperature?
The cookware or food in the oven will cause the oven to take longer to preheat. Remove items to reduce preheat time. Adding more racks to the oven will cause the oven to take longer to preheat. Remove some racks.
General| Type | Freestanding |
|---|---|
| Fuel Type | Electric |
| Oven Capacity | 5.3 cu. ft. |
| Cooktop Surface | Porcelain |
| Number of Burners | 4 |
| Self-Cleaning | Yes |
| Color | White |
| Brand | GE |
| Model | JBS160DMWW |
| Product Type | Range |
| Convection Oven | No |
| Warranty | 1 Year Limited |
| Width | 30 inches |
Instructions for installing and securing the anti-tip device to prevent range tipping.
General safety guidelines for using the appliance safely.
Safety guidelines specific to operating the cooktop.
Safety guidelines for operating the oven safely.
Safety instructions for using the self-cleaning oven feature.
Information on operating and using the surface units of the range.
Explanation of the oven control panel and its functions.
Information on special oven features like temperature adjustment and Sabbath mode.
Explanation of various oven cooking modes and their usage.
Recommendations for rack positions and modes for different food types.
Instructions for cleaning the exterior surfaces of the range.
How to clean the control panel and remove/clean control knobs.
Instructions for cleaning the oven exterior and painted surfaces.
How to clean stainless steel surfaces on the range.
Instructions for cleaning the surface units and drip pans.
Instructions for cleaning the oven interior manually or via self-clean.
Procedures for cleaning the glass cooktop for daily use and residue removal.
Information regarding the oven light and its replacement.
Instructions for removing and replacing the oven door.
Troubleshooting for issues with surface unit operation and performance.
Troubleshooting for scratches, discoloration, and damage to the cooktop glass.
Troubleshooting for oven temperature, baking, and broiling performance.
Troubleshooting for oven not working, unusual sounds, and self-clean problems.
Troubleshooting for issues with the control panel, display, and error codes.
Troubleshooting for problems with the clock and timer functions.
Details of the electric range warranty provided by GE Appliances.
List of items and conditions not covered by the GE Appliances warranty.
Listing of available accessories and replacement parts for the appliance.
Information on accessing the GE Appliances website and registering the appliance.
How to schedule repair service online or by phone.
Information on ordering replacement parts and accessories.
