EasyManuals Logo

GE JCP930 Installation Instructions

GE JCP930
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TOOLS YOU WILL NEED
CAUTION:
BEFORE YOU BEGIN
Read these instructions carefully and completely.
IMPORTANT – Save these instructions for local
inspector’s use.
IMPORTANT – Observe all governing codes and
ordinances.
Note to Installer – Be sure to leave these instructions with
the Consumer.
Note to Consumer – Keep these instructions for future
reference.
30” Electric Cooktop
Installation
Instructions
JCP910, JCP930
NOTE: This appliance must be properly grounded.
Skill level – Installation of this appliance requires basic
mechanical and electrical skills.
Completion time – 2–3 hours.
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not
covered under the Warranty.
PARTS INCLUDED
1/8” Drill Bit and
Electric or Hand Drill
Phillips
Screwdriver
Foam Strips
4 screws
Pub. No. 31-10602
01-05 JR
Printed in the United States
1
Questions? Call 1.800.361.3400 or visit our Website at: www.GEAppliances.ca
2 Hold Down Brackets
Ruler or
Straightedge
Hand or
Saber Saw
Pencil
Junction
Box
Wire Nuts
MATERIALS NEEDED

Other manuals for GE JCP930

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE JCP930 and is the answer not in the manual?

GE JCP930 Specifications

General IconGeneral
TypeElectric
Number of Burners4
Surface MaterialGlass
Control TypeTouch
Dimensions30 in
Cooktop SurfaceSmooth
ColorBlack
Weight45 lbs
Voltage240V
Installation TypeDrop-In
Warranty1 Year Limited

Related product manuals