Why does my GE Hob display flash?
- MMichael RiosSep 2, 2025
The display on your GE Hob may flash due to a power failure. Reset the clock.

Why does my GE Hob display flash?
The display on your GE Hob may flash due to a power failure. Reset the clock.
What causes control signals after entering cooking time or start time on my GE Hob?
Control signals after entering cooking time or start time on your GE Hob indicate that you forgot to enter a bake temperature or cleaning time. Touch the Bake pad and desired temperature or the Self Clean pad and desired clean time.
Why is my GE Hob food not baking properly?
If food isn't baking properly in your GE Hob, several factors could be the cause. It could be that the oven controls are improperly set, so check the Cooking Modes section. Other potential issues: the rack position is incorrect or not level (see the Cooking Modes section and Cooking Guide), incorrect cookware or cookware of improper size is being used (see the Cookware section), the oven temperature needs adjustment (see the Special Features section), or you made an ingredient substitution that changed the recipe outcome.
Why is my GE Hob oven door is crooked?
The oven door of your GE Hob is crooked because the door is out of position. Because the oven door is removable, it sometimes gets out of position during installation. To straighten the door, re-install and Cleaning section.
Why is my GE Hob storage drawer won’t close?
Your GE Hob storage drawer might not close because the power cord may be obstructing the drawer in the lower back of the range. Reposition the drawer and power cord. See the Storage range section.
What to do if there is water remaining on oven floor after Steam Clean cycle of my GE Hob?
If there is water remaining on the oven floor of your GE Hob after the Steam Clean cycle, remove any remaining water with a dry cloth or sponge. This is normal.
What should I do if my GE Hob oven door will not open after a clean cycle?
If your GE Hob oven door won't open after a clean cycle, the oven is likely still too hot. Allow the oven to cool below the locking temperature before attempting to open it.
Why is my GE Hob oven temperature too hot or too cold?
If your GE Hob oven temperature is too hot or cold, it may need adjustment. Refer to the Special Features section for instructions on how to adjust the oven temperature.
What to do if my GE Hob has power outage, clock flashes?
If you experience a power outage and the clock flashes on your GE Hob, reset the clock. If the oven was in use, you must reset it by pressing the Cancel/Off pad, setting the clock, and resetting any cooking function.
Why is my GE Hob oven will not self-clean?
If your GE Hob oven will not self-clean, the temperature may be too high to set a self-clean operation. Allow the oven to cool and reset the controls.
Instructions for securing the range to prevent tipping.
Essential safety precautions for appliance operation.
Further safety guidelines for appliance use, child safety, and hazards.
Warnings about storing flammable items near the range.
Procedures for handling fires involving the range.
Operation of surface units with knob controls, including indicator lights.
How to operate the warming zone feature for keeping food warm.
Tips for home canning and details on radiant glass cooktops.
Explanation of the temperature limiter for protecting the glass cooktop.
Information on choosing suitable cookware for optimal performance on glass cooktops.
Detailed explanation of each oven control button and its function.
Details on adjustable settings like temperature offset and sound volume.
Instructions for setting and using the Sabbath mode feature.
Recommended rack positions for various cooking tasks.
Guidelines on using foil, liners, and general cookware advice.
Description of different oven cooking modes like Bake, Broil, Convection.
Recommendations for food types, modes, and rack positions.
Procedures for cleaning the outer surfaces of the range.
Methods for cleaning the oven interior, including manual, steam, and self-clean.
Instructions for cleaning the glass cooktop surface.
Procedures for replacing the oven light bulb and removing/installing the oven door.
Common problems and their solutions to avoid unnecessary service calls.
Troubleshooting for oven and drawer issues, including error codes.
Troubleshooting for display issues, odors, rack problems, and steam.
Details of the product warranty coverage and exclusions.
Information on available accessories to enhance cooking and maintenance.
Accessing the GE Appliances website, registering your appliance, and remote connectivity options.
Information on scheduling service and ordering replacement parts or accessories.
Direct contact information for customer feedback and inquiries.
Loading...