Using the clock and timer, ronsomemodels)
GEAppliances.com
Not allfeatures are on allmodels.
To Set the Clock
Makesure the clockisset to the correct
time ofday.
Theclock must be set to the correct time
of dag for the automatic oventiming
functions to work properlg.Thetime of dag
cannot be changed during a delaged cooking
or a delaged self-cleaning cgcle.
[7] Touch the Clock pad twice.
[_ Touch the + or - pads.
If the + or - pads are not touched within
one minute after gou touch the Clock pad,
the displag revertsto the original setting.
If this happens,touch the Clock pad twice
and reenterthe time of dag.
[_] Touchthe Stert/On pad until the time
of dag shows in the displag.This enters
the time and starts the clock.
To check the time of day when the display
is showing other information, simply touch
the Clock pad. The time of day shows unti!
another pad is touched.
To Turn Off the Clock Display
If gou have several clocksin gour kitchen,
gou mag wish to turn off the time of dag
clock displag on gour range.
I_] Touch the Clock pad once to turn
off the time of dag displag.Although
gou will not be able to seeit, the clock
maintains the correct time of dog.
[_ Touchthe Clockpad twice to recall
the clock displag.
o
irner _
On/Off
Thetimer isa minutetimer only.
The(:leadOff pad doesnot affect
the timer.
To Set the Timer
Thetimer does not contro! oven operations.
Themaximum setting on the timer is 9 hours
and 59 minutes.
[_ Touch the Kitchen Timer On!Off pad.
[_ Touch the + or - pads until the amount
of time gou want shows in the displag.
The maximum time that can be entered
in minutes is59.Times more than 59
minutes should be changed to hours
and minutes.
If you make a mistake, touch the Kitchen
Timer On!Off pad and begin again.
%
[]
Touchthe Start!On pad. The time
will start counting down, although
the displag does not change until
one minute has passed.
When the timer reaches :00, the control
will beep 3 times followed bg one beep
everg 6 secondsuntil the Kitchen Timer
On!Off pad istouched.
15
¢b
3"
w
o
rb
o
"0
"0
0
To Next Page
Loading...
Need help?
General
