EasyManua.ls Logo

GE JGB910 - Page 43

GE JGB910
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A, WARNING!ANTI-TIPOEVICE
All rangescan tip and injurycouldrasulL
Toprevent accidentaltipping of the range,attach an approvedAnti-tip devicetothe wall. (SeeInstalling
theAnti-tipDevicein this section.)Tocheckifthe deviceis installedand engagedproperly,carefullytip
therangeforward.TheAnti-tipdeviceshouldengageandpreventtherangefromtipping over.
ff youpull the range outfromthe wallfor any reason, makesurethe Anti-tip device is engagedwhen
youpushthe range backagainstthe wall.
For your safety, never use your range for wanning or headng the room. Your oven and cooktop
are not designed to heat your kitchen. Top burners should not be operated without cookware
on the grate. Such abuse could result in fire and damage to your range and will void your
warranty.
Do not store or use combustible materials, gasoline or other flammable vapors and liquids in
the vicinity of this or any other appliance. Explosions or fires could result.
Do not use oven for a storage area. Items stored in the oven can ignite.
Do not let cooking grease or other flammable materials accumulate in or near the range.
LOCATION
Donotlocatethe rangewhere it maybe subjectto strongdrafts.Any openingsin the floor or wallbehind
the rangeshouldbe sealed.Make surethe openingsaroundthe base of the rangethat supplyfreshair
for combustionandventilationare notobstructedby carpetingor woodwork.
Your range, like many other household items,
is heavy and can setde into soft floor coverings
such as cushioned vinyl or carpeting. Use care
when moving the range on this type of flooring.
It is recommended that the following simple
and inexpensive instructions be followed to
protect your floor.
The range should be installed on a sheet of
plywood (or similar material). When the floor
covering ends at the front of the range, the area
that the range will rest on should be built up
with plywood to the same level or higher than
the floor covering.
This will allow the range to be moved for
deaning or servicing. Also, make sure your
floor covering will withstand 180°F. (See the
InstallationSafetyInstructions secdon.)
Make sure the wall coverings around your
range can withstand the heat generated (up to
200°F.) bythe range. (See the InstallationSafety
Instructions section.)
IMPORTANT!
Removeall tapeandpackaging.Make suretheburnersareproperlyseatedand level.
Takethe accessorypack outof the oven.
Checktobesurethat no rangepartshave comelooseduringshipping.
43

Other manuals for GE JGB910

Related product manuals