To Next PageTo Next PageWhy does my GE Ranges clock flash after a power outage?
If the clock on your GE Ranges flashes after a power outage or surge, reset the clock. If the oven was in use, you must reset it by touching the Clear/Off pad, setting the clock, and resetting any cooking function.
Why is my GE JGBP28 Ranges making fan noise?
The cooling fan in your GE Ranges may automatically turn on and off to cool internal parts, which is normal. The cooling fan will cycle on and off as needed.
Why are my GE Ranges burner flames very large or yellow?
If the burner flames on your GE Ranges are very large or yellow, it indicates an improper air-to-gas ratio. If your range is connected to LP gas, contact the person who installed your range or made the conversion.
What to do if GE Ranges oven is not clean after a clean cycle?
If your GE Ranges oven is not clean after running a clean cycle, see the Using the self-cleaning oven section. Also, it's possible that the oven was heavily soiled. Clean up any significant spillovers before initiating the clean cycle. For heavily soiled ovens, running the self-clean cycle again or for a longer duration may be necessary.
What happens if there is a power outage and the clock flashes on my GE Ranges?
If you experience a power outage and the clock on your GE Ranges is flashing, you should reset the clock. If the oven was in use during the outage, clear it by pressing the Clear/Off pad, then set the clock and reset any cooking functions.
How to fix GE JGBP28 drawer that does not slide smoothly or drags?
If the drawer on your GE Ranges doesn't slide smoothly or drags, it may be out of alignment. Try fully extending the drawer and then pushing it all the way back in. Also, the drawer might be overloaded or the load is unbalanced. Try reducing the weight and redistributing the contents.
What to do if GE JGBP28 oven will not self-clean?
If your GE Ranges oven isn't self-cleaning, ensure the oven has cooled to room temperature before starting the self-clean cycle. Also, on models with a door latch, make sure the oven door is fully locked by moving the door latch handle all the way to the right. If these steps do not work, consult the Using the self-cleaning oven section.
Why my GE JGBP28 Ranges clock and timer do not work?
If the clock and timer on your GE Ranges aren't working, ensure the range is fully plugged into a properly grounded electrical outlet. Also, check your home's fuse box or circuit breaker; a blown fuse or tripped breaker can cause this issue. Replace the fuse or reset the circuit breaker if necessary.
What to do if my GE JGBP28 Ranges oven door will not unlock?
If the oven door on your GE Ranges won't unlock, it might be too hot. Allow the oven to cool below the locking temperature. Also, avoid locking the door with the door latch unless you are using the self-clean feature.
What to do if my GE JGBP28 Ranges oven door will not open after a clean cycle?
If the oven door on your GE Ranges won't open after a clean cycle, the oven may still be too hot. Allow the oven to cool below the locking temperature.
General| Type | Freestanding |
|---|---|
| Number of Burners | 4 |
| Oven Capacity | 4.8 cu. ft. |
| Control Type | Knobs |
| Ignition Type | Electronic |
| Self-Cleaning | Yes |
| Fuel Type | Gas |
| Cooktop Surface | Porcelain |
| Width | 30 in |
| Color | Stainless Steel |
| Dimensions (H x W x D) | 30 in |
Crucial safety steps for gas leaks, including immediate actions to take.
Essential safety measure to prevent appliance tipping and related injuries.
Instructions for safe and effective use of cooktop burners.
Detailed explanation of oven control panel functions and timer settings.
General guidance on oven operation, including vents and power outages.
Instructions for operating the oven during religious observances.
How to properly use and maintain the warming drawer for food.
Cleaning instructions for burner grates and drip pans.
Cleaning guide for standard twin burner assemblies.
Procedure for removing and cleaning the oven door.
Cleaning the appliance's control interface and knobs.
Crucial pre-installation checks and safety information.
Step-by-step guide for safe gas line connection.
Requirements and safety for appliance power connection.
Mandatory safety step to secure the range against tipping.
Diagnosing and resolving burner ignition and performance issues.
Addressing common issues with oven baking and roasting performance.
Troubleshooting problems preventing the self-cleaning cycle.
Form for ordering specific broiler pan accessories.
Information on accessing online resources and customer support.
Details of the product warranty coverage for US customers.
Details of the product warranty coverage for Canadian customers.
