ge.com
Power Failure
If a flashing time of day is in the display,
you have experienced a power failure.
Reset the clock.
To reset the clock, touch the TIMER/CLOCK
pad and hold 3 seconds. Enter rite correct
time of day by touching rite + or - pad.
Touch the STARTpad.
Thecontrolhasa series of tones that will sound at different times.Thesetonesmaysound while
youset the control for anoven function or at theend of the ovenfunction. Theywill also alert you
whenan incorrect time or temperaturehasbeenentered or if there is aproblem with the oven.
Tones While Setting the Contre/
When you touch a touch pad you will hear
a beep. This beep will let you know you
have placed enough pressure on the pad
to activate it.
Attention Tone
This tone will sound if you set an invalid
flmcfion or try to set an additional flmcfion.
The tone can be quickly identified by
watching the display messages.
Preheat Notification Tone
When you set an oven temperature rite
oven automatically starts to heat. When rite
temperature inside the (wen reaches yore
set mmperamre a tone will sound to let you
know to place the fkJod in the oven.
9
To Next Page
Loading...
