D
Dalton SharpSep 23, 2025
Why does my GE Oven make fan noise?
- TTiffany ThomasSep 23, 2025
A cooling fan may turn on and off automatically in your GE Oven. This is normal. The fan will run until the function is over or the door is opened.
To Next PageTo Next PageWhy does my GE Oven make fan noise?
A cooling fan may turn on and off automatically in your GE Oven. This is normal. The fan will run until the function is over or the door is opened.
What to do if my GE Oven is smoking excessively?
If your GE Oven is smoking excessively, it is likely due to excessive soil. Touch the CLEAR/OFF pad, open the windows to rid the room of smoke, and wait until the LOCKED DOOR light goes off. Then, wipe up the excess soil and reset the clean cycle.
What to do if the door of my GE JGRP20 Oven will not open after a clean cycle?
If your GE Oven door will not open after a clean cycle, it is likely because the oven is still too hot. Allow the oven to cool below locking temperature.
Why does my GE JGRP20 display flash?
The display on your GE Oven may be flashing due to a power failure. Reset the clock to resolve this issue.
What to do if my GE JGRP20 Oven is not clean after a clean cycle?
If your GE Oven is not clean after running a clean cycle, it could be due to improperly set oven controls, so check the Self-cleaning oven section. Alternatively, the oven may have been heavily soiled. In this case, clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean again or for a longer period of time.
Why is there a “Burning” or “oily” odor emitting from the vent of my GE JGRP20?
This is normal in a new oven and will disappear in time. To speed the process, set a self-clean cycle for a minimum of 3 hours. See the Self-cleaning oven section.
Why does my GE JGRP20 Oven have a strong odor?
A strong odor from your GE Oven could be due to an improper air/gas ratio in the oven; adjust the oven burner air shutter. It can also be due to the insulation around the inside of the oven, which is normal in a new oven and will disappear in time.
What does it mean if there is moisture in my GE JGRP20 Oven?
These droplets are harmless and will evaporate as the oven continues to heat up.
What to do if my GE JGRP20 light does not work?
If the oven light in your GE Oven is not working, the light bulb may be loose or defective. Try tightening or replacing the bulb. If that doesn't work, the pad operating the oven light may be broken, and you should call for service.
Why will my GE Oven not self-clean?
Your GE Oven may not self-clean if the oven temperature is too high to set a self-clean operation. Allow the oven to cool to room temperature and reset the controls. Also, ensure that the oven door is fully closed. If problems persist, see the Self-cleaning oven section to ensure the oven controls are properly set.
Explanation of oven control panel buttons and display functions.
How to use the baking function, including shelf positions and preheating.
Setting immediate start, automatic stop, and delayed start baking.
DIY guide to adjust the oven thermostat for accuracy.
Instructions and tips for roasting and broiling food.
Steps to set and manage the oven's self-cleaning cycle.
General
