9
Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Customer Service
Cook and Hold
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
the cooking function is finished.
To activate this feature, follow the steps
below.
Press the
BAKE
and
BROIL HI/LO
pads
at the same time for 3 seconds until
the display shows
SF.
Press the
COOKING TIME
pad. The
display will show
Hld OFF.
Press the
COOKING TIME
pad again
to activate the feature. The display
will show
Hld ON.
Press the
START
pad to activate
the cook and hold feature and
leave the control set in this special
features mode.
Changing the Speed of the + or – Pads
As you use the + or – pads when setting a time
or temperature, you may notice the display
changes slowly. This special feature allows you to
change the speed. To set the speed you prefer,
follow the steps below.
Press the
BAKE
and
BROIL HI/LO
pads
at the same time for 3 seconds until
the display shows
SF.
Press the
+
pad. The display will show
you a set speed between 1 and 5.
Press the
+
pad to increase the speed
up to the number 5.
Press the
–
pad to decrease the speed
down to the number 1.
Press
START
to activate the setting
and leave the control set in this
special features mode.
To Next Page
Loading...
Need help?
General
