Theekctronk dock
m yourcooking
fixmterisan
aaxn-atesolid-statedevice.
CLOCKMUST’BENH’BEFORE
IEM71’RONICCONTROLS
F(M? OVEN
WILL
WORK.
When power is first connected to
yourcooking center or after a
powerfail~re of any kind, the
digitaldisplayon boththe microwave
andconventionalovencontrolpanels
showlighted$’sarid18’splusalloven
functionsfor about 15seconds.
Then all lightsgo off and RESET
appears in the upper display,PF
(for Power Failure) appears in the
lowerone.
Touchthe CLEAR/OH? pad on the
upper touch control panel and the
microwaveoven is ready to use.
H t t c
BeforeWingtheamwmtiod
mm, theelectronicdigitaldock
mustbesetasM1OWS:
Step1:TouchtheCUXK pad.
DiSplayshows0:00.
Step 2: Touchthe number pads
the same wayyou read them. For
example,to set 12:34,touch number
pads 1,2,3 and 4 in that order.
If
numberpadsarenottouched
withinseveralsecondsafteryoutouch
CLOCKpad,“IX EE”flashesarid
displayrevertstooriginalsetting.If
thishappens,touchCLOCKpad
andenternumbersagain.
Step 3: Touch the STARTpad.
This enters the time arid startsthe
clock. If you don’ttouch this pad,
the clock starts automaticaHyafter
six seconds.
MyouWUN”animpossibletime
such as 12:84,the display flashes
“EE E13°for Error. To correct it,
just touch the correct number pad!
and the clock starts.
IfPF appems9 touch the CLOCIS
pad and th~ilthe
numberstostart
theclock.
‘lbcheckthetimeofday
whendisplayisshowingother
information,simply touch the
CLOCK pad._Tim~~fdayshowsfor
as long as your finger is on the pad.
,.
To correct
thetimed?day,touch
the CLOCK pad and enter the
correct numbers.
N~E: Timeofday cannot be
changedduringa conventional
o~~encookingoperation.
os when I camehonnf+thedi$play
showedPm’insteadof
thetime.
what”hap@m’d?
A.
Yourhome had a brief power
failurewhile you were gone.
Nothing is wrong with your clock—
just reset it.
Q. Whenchangingthetimeof
day,ifItoldl themom pad
andthendiscoverthatthetime
shownisrightydoIhavetoreset
thedock?
A. No.
Theoriginaltimeofday
willreappearinabout15seconds
after“EEEE”flashes.
Q.
CanI changethedock
while19mcookingfoodinthe
conventionaloven?’
A. No.
The clock cannot be
changed during any program that
uses the oventimer or the display.
Youmusteither stopthose programs
or waituntil theyare finishedbefore
changing the time.
Q CanIche& thetimeofday
while
thedisplayisshowing
—
nhutdsecmd ~imee
A. Yes.
Simply touch CLOCK pad
and time of day showsfor as long
as your finger is on the pad.
10
To Next Page
Loading...
Need help?
General
