Usingthe self-cleaning lower oven.
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
C-Self--')
lean)
1 2 3
6 7 8 9 0
Gooloih
tar_
OI! Off
1 2 3 4 5
How to Delay the Start of Cleaning (availableonJKP86 models only)
[] Press the SeffClean pad.
[] Using tile nunlber pads, enter tile
desired clean time.
[] Press tile DolayStart pad. Tile
earliest stnrt time you can set will
appear in tile displa).
[] Using tile nulnber pads, enter tile
time of day _ou want the clean cwle
to start.
Tile door locks automadcally: Tile display
will show the start time. It will not be
possible to open the oven door tmtil
the temperature drops below the lock
temperature and the LOCKEDor LOCKED
DOORlight goes off.
_,_]/en tile LOCKEDor LOCKEDDOORlight
goes off, you will be able to open tile
(loon
6 7 8 9 0 [] Press the Start pad.
After a Clean Cycle
_m may notice some white ash in the
oven. _4]pe it up with a damp cloth after
tile oven cools.
If white spots remain,remove them with a
soap-filled steel wool pad and rinse thoroughly
with a vinegarand water mlkture.
These deposits are tlStl[lllv [i salt
residue that cmmot be reinoved by
tile clean cycle.
]f tile oven is not clean aher one clean
cycle, repeat tile cycle.
You cannot set tile o_en fi)r cooking
tmtil tile o_en is cool enough fiw tile
door to tlnlock.
X4]/ile tile oven is sellk'leaning, you
can press tile Clock pad to display
tile time of day. To return to tile
clean countdown, press tile Cooking
time pad.
If tile racks become hard to slide,
apply a small amount (ff vegetable oil
or cooking oil to a paper towel and
wipe the edges of the racks with the
paper t_m'el.
3O
To Next Page
Loading...
Need help?
General
