GE JNM3184DPBB - Chef Connect

49-7000130 Rev. 0 7
Use the Chef Connect feature for connecting your microwave to a GE Appliances range to sync your vent fan, cooktop surface lights and clock
via Bluetooth technology.
1. You must have a Chef Connect enabled range. To pair your
microwave for the first time, initiate the Chef Connect process on
theGEAppliancesrange.Refertotherangeowner'smanualfor
instructions
2. On the microwave, hold Chef Connect button for 3 seconds.
The Bluetooth icon on the display will start flashing as the
microwave starts to search and pair with your GE Appliances
range. The icon will remain ON after pairing successfully.
If a GE Appliances range is not found within 2 minutes during
search mode the microwave will stop searching and the
Bluetooth icon willturnOFF.
On initial setup, the setup protocol will start.
If the Chef Connect feature is enabled the default settings are as
follows:
- Display clock sync: ON
- Auto cooktop light: ON (HIGH setting)
-Autoventfan:OFF
- Auto off: 15 minutes
3. Select 1 to sync the surface lights to your GE Appliances range.
It allows the microwave surface lights to turn on at HIGH level
automatically when the paired range’s cooktop burner turns on.
4. Select 1 to sync the vent fan to your GE Appliances range.
This allows the microwave vent fan to turn on at LOW speed
automatically when the paired range’s cooktop burner turns on.
Pairing is now complete, the Chef Connect feature is now on.
Note: If there is no sync option selected during set up, 5 minutes
after icon turns on, the units will return to stand-by mode.
After completing the setting per above steps, your microwaves
vent fan and cooktop light will be set to turn on automatically
when the cooktop burner is turned on. The cooktop and range
clock display will be syncd to display the same time. The vent fan
and cooktop light will be set to automatically turn off 15 minutes
after the cooktop burner is turned off.
If desired, the light, fan, and auto off settings can now be
changedusingsettingsoptions4,5,and6,respectively.
Press Chef Connect once to turn off and twice to re-connect.
The icon will illuminate when on.
In the case of an unintended disconnect such as lost power to the
microwave or range the connection will remain after power
resumed.Forveryshortpowerinterruptions,thepowermay
need to be reset in order to reconnect.
Chef Connect
Features May Differ by Model.
Formoredetailsabouthowtouseyournewappliance,pleaseconsultthefullOwner'sManual-informationonfront
cover.