EasyManua.ls Logo

GE JS968 - Glass Cooktop

GE JS968
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaningtheglass cooktop.
Oo.,ro, oo*o.,
Begin b,v locking the cooktop; see the
LOCK/UNLOCKfiOrD a .SECONDS ControlLockoutsection.
Cleanyourcooktepafter
eachspill. UseCERAMA
BRYTE®CeramicCooktop
Cleaner.
Normal Daily Use Cleaning
ONLY use CEI_Bd_<IABRYTE _ (;ermnic
Cooktop Cleaner on the glass cooktop.
Other creams may not be as eflecfixe.
To maintain and protect the smti_ce of
yore" glass cooktop, tollow these steps:
[] Before using the cooktop fin" the
fi_t tim e, clea n it with CEI_Bd_4A
BRYTE ':Ceramic Cooktop Cleane_:
This helps protect the top and
makes cleanup easier:
, ) " _ < @
[] Dad) tlse { f (,E]_]_ BRYTE
Ceramic Cooktop Cleaner will hel I)
kee I) the cooktop looking new.
[] Shake the cleaning cream well.
Apply a few drops of CEIL_<IA
BRYTE _>Ceramic Cooktop Cleaner
directly to the cooktop.
[] Lrse a p_per towel or (2EIL_MA
BRYTE " Cleaning Pad fin" Ceramic
Cooktops to {'lean the entire
cooktop sure_ce.
[] Use a {hw cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE: It is very important that you DO NOT
heat the cooktop until it has been cleaned
thorough/_
Use a CERAMA BRYTE_ Cleaning
Pad for Ceramic Cooktops.
Burned-On Residue
WARNING:DAMAGEto yourglasssurface
mayoccurif youusescrubpadsother than the
pad includedwith yourcooktop.
[] Allow the cooktop to cool.
[] Spread a few drops of CEIL_4A
BRYTE _>Ce_ami{' (2ooktop Cleane_
on the entire bm'ned residue area.
[]
Using the included CEILBd_4A
BRYTE <_:'Cleaning Pad fin" Ceramic
Cooktops, _ub the residue area,
aII))lxing, , pressure as needed.
[]
[]
If any residue remains, repeat the
steps listed above as needed.
For additional protection, alter all
residue has been remoxed, polish
the entire surfi_ce with (;EI_<IA
BRYTE ':Ceramic Cooktop Cleaner
and a paper towel.
The CERAMABRYTE_ Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts Cente_
See hTstructions under "To Order
Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
3d
Heavy, Burned-On Residue
[] Allow the {'ooktop to cool.
[] Use a single-edge razor blade
scraper at approximately a 45 °
angle against the glass surtace
and scrape the soil. It will be
necessary to apply pressure to
tile i'_lZOi" scraper in order to
remove the residue.
[]
After scraping with the razor
scraper, spread a few drops of
CEI_BdMA BRYTE ) Ceramic
Cooktop Cleaner on the entire
bm'ned residue area. Use the
CEIL_dVIA BRYTE '_Cleaning Pad to
remove any remaining residue.
[]
For additional protection,
after all residue has been
removed, polish the entire
stn'lace with CEI_Bd_<IA BRYTE':
Ceramic Cooktop Cleaner
and a paper towel.

Related product manuals