GE JVM1635 Installation Instructions

4
Installation Instructions
TOOLS YOU WILL NEED
#1 and #2 Phillips
screwdriver
Pencil
Ruler or tape measure and
straight edge
Carpenter square
(optional)
Tin snips (for cutting
damper, if required)
Electric drill with
3
⁄16″,
7
⁄16″,
1
⁄2″ and
5
⁄8″ drill bits
Hammer (optional)
Stud finder
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed bottom
cabinet installations only)
Gloves
Saw (saber, hole or keyhole)
Level
Duct and masking
tape
Scissors (to cut
template, if necessary)
Safety goggles

GE JVM1635 Specifications

General

Brand	GE
Model	JVM1635
Category	Microwave Oven
Language	English